53
Smart TV CB24iTV, CB28iTV & CB32iTV |
49892, 49891 & 49890
UK
10. SATELLITE SETTINGS
In this menu, you can perform the automatic satellite search and other various satellite
settings.
1. Press the
[INPUT]
button to enter the input source menu.
2. Use the
[▲
▲
▼
▲]
buttons to navigate in the menu and select the menu item DVB-S.
3. Press the [OK] button to confirm the selection and switch to satellite mode.
4. Use the
[▲
▲
▼
▲]
buttons to choose between „
Fast Scan
“ and „
Satellite Scan
“.
5. The following setting options are available in the menus:
Satellite Scan
The menu is divided into three columns. On the left you will find all listed satellites. In the
middle the corresponding transponder and on the far left the LNB setting.
The following setting options are available in the menu.
SCAN (BLUE)
1. Use the
[▲
▲
▼
t
▲
u
]
buttons to navigate in the menu and select the desired satellite /
transponder.
2. Use the
[OK]
key to mark the desired satellite or transponder.
3. Press the
[Blue]
key to enter the search setting.
4. Go to „
Enter
“ and press the
[OK]
key to start the search.
The following setting options are available:
Scan Mode:
Default Scan / Blind Scan / Network Search
Channel Type: All Channels / Free Channel
Service Type: All channels / DTV / Radio
Enter:
Starts the automatic search.