One Chirp
Two Chirps
Three Chirps
Four Chirps
Button
LED One Pulse
LED Two Pulses
LED Three Pulses
LED Four Pulses
(Factory Default Setting)
12
ON
Turn On the Ignition
3 long chirps and 3 flashes of the parking lights will
confirm exit of the programming mode.
Note: Waiting 15 seconds after the last command will
also cause the system to automatically exit the
programming mode.
Remote Feature Programming
Use the transmitter buttons as illustrated to adjust the features required. Keep repressing the transmitter button
that relates to the feature you want to adjust until the correct amount of chirps/beeps is heard. Move on to the
next feature.
Chirps On, All Outputs
Chirps Siren Output Only
Chirps Horn Output Only
Arm/Disarm Chirps Off
Automatic Arming without
Passive Door Locking
Automatic Arming with
Passive Door Locking
Manual Arming
Automatic Rearm Off
Automatic Rearm On
Instant Door Ajar Warning
45 Seconds Delay
Door Ajar Warning
Car-Jack Mode Off
Manual Car-Jack Mode
+
Automatic Car
Jack Mode
Door Ajar Warning Off
*Instant / 45 Seconds Delay Door Ajar Warning
This feature controls the error chirp that is generated if the system is armed with the door trigger active. This is
useful in a vehicle that has a long dome light delays after the door has been closed. If the system is armed before
the dome light has turned off, the security system will generate the door trigger error chirp. Use this feature to
disable the door open error chirp.
Parking Light “On” for
30 Seconds Upon an
Unlock Signal
Pathway Illumination
Feature “Off”
Parking Light “On” for 30
Seconds Upon an Unlock
Signal and 10 Second Upon
a Lock Signal
+
+
Ignition Key Controlled
Door Lock Only
Ignition Key Controlled
Door Unlock Only
Ignition Key Controlled
Door Lock and Unlock On
Ignition Key Controlled Door
Lock and Unlock Off
Alarm Feature Programming (Part 1 )
Step 3
Step 4
(Continued)
PLUS-4900-IM.qxp 4/30/09 3:06 PM Page 12
