background image

 

 

_________________________________________________________________________________________________________________________ 
Card Access Sensor Bridge 

 

       

      Page 12 of 12 

Quick Start & Installation Guide 

 

 

Card Access, Inc.

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

 
 
 

 

 
The information contained in this document represents current information and views of Card Access, Inc. as of the date of 
publication. Card Access cannot guarantee the accuracy of any information presented after the date of this document’s publication. 
 
COPYRIGHT ©2009 Card Access, Inc. All rights reserved. Any previously copyrighted contents contained herein remain the 
property of the respective creators. 
 
“Card Access,” “The Wire Stops Here.” and “Do More. Control More. Make More.” are trademarks of Card Access, Inc. 
Control4 is a registered trademark and 4Sight is a trademark of Control4 Corporation. 
ZigBee and ZigBee PRO are marks of the ZigBee Alliance. 
Other marks may be the property of their respective owners. 
 

Summary of Contents for ZGB10A













Reviews: