Page 12
O
PERATOR
P
ROGRAMMING
- B
ASIC SETTINGS
M
ENU
O
VERVIEW
:
a
Set door OPEN position
b
Set door CLOSED position
c
Program hand transmitter
T
O
S
ET
U
P
T
HE
O
PERATOR
:
Menu
a
S
ET DOOR OPEN POSITION
2
1.
Press
%
for 2 seconds until LED
S
blinks and all others are illuminated.
2.
To move the garage door to desired fully
OPEN
position press & hold the
&
until desired
DOOR OPEN
position is reached.
For fine-tuning use the
&
(
OPEN
) and
/
(
CLOSE
) buttons.
☞
Advice:
The reference point has to be passed 1x.
Z
will light up briefly when reference point has to be passed 1x.
☞
Advice:
The reference point has to be passed 1x.
Z
will light up briefly when reference point has to be passed 1x.
3.
Press
%
to store and to go to Menu
b
.
Menu
b
S
ET DOOR CLOSE POSITION
4
1.
LED
F
blinks and all others are illuminated.
2.
To move the garage door to desired fully CLOSED position press & hold the
/
until desired
DOOR CLOSE
position is reached.
For fine-tuning use the
/
(
CLOSE
) and
&
(
OPEN
) buttons.
3.
Once door position is correct press
%
to store and go to Menu
c
.
