Page 7
ƒ
Install door bracket at centre position of door and rail bracket on centre position above door.
Make sure there is at least 10 mm clearance between highest travel point of door and rail.
!
For doors fitted with 3 point latching:
Before fitting the door bracket to the door, the top
latch assembly must be removed.
For GRP doors only
–also remove the retaining screws
alongside the door bracket fixing holes. When fitting the door bracket, use the lower holes
for GRP doors only and the upper holes for all other doors.
- Level and mount operator.
-
Disengage carriage from chain or belt! Door may only be moved with moderate speed.
- Connect operator pull bar to door bracket.
Note: Remove or disengage all door latches and disable the door lock prior to installation!
D
ETERMINE GARAGE DOOR TYPE
Determine your garage door type as indicated in Step
ƒ
or
©
.
Follow the individual instructions required for your specific garage door type.
If your garage door type is not included, please contact your distributor.
Special accessories or operator modifications may be required.
O
PERATOR
I
NSTALLATION
1-Piece up-and-over doors
min. 35 mm
10 mm
