12
8. Take a cardboard packaging corner, fold in half, and place under the pallet/unit with the fold away from the
pallet. Gently position unit parallel with the pallet using the edge of the unit to support the pallet. Once in
position, gently roll the unit off of the pallet.
With Forklift
Required Tools for Single Door Unit (12, 25 & 30 cu.ft. Models):
Phillips head screwdriver, 7/16", 5/16"-18" wrenches, wrench supplied and a minimum of 2 people.
Required Tools for Double and Triple Door Unit (45, 49 & 72 cu.ft. Models):
Phillips head screwdriver, 7/16", 5/16"-18" wrenches and a minimum of 2 people.
All the units are shipped with factory installed feet with rolling casters supplied inside of the unit. The
following instructions demonstrate how to remove the cabinet from its shipping base (pallet) and install the
casters without use of a forklift.
1. Remove the screws, bolts and pallet by following the instructions given in section Without Forklift section
from step 1 to step 3.
Note:
Always use caution when lifting unit with forklift to ensure not to damage or drop unit.
