8527-0544-2M Rev B
APS Enterprise Scale
1
INTRODUCTION
Thank you for selecting and purchasing the Detecto APS Enterprise Scale. It was built with
Detecto quality and reliability at our factory in Webb City, Missouri and incorporates the latest
in digital technology and innovative features for the weighing industry.
This manual is provided to guide you through installation, setup/calibration and operation of the
Detecto APS Enterprise Scale. Please read it thoroughly before attempting to install the scale
and keep it handy for future reference.
SPECIFICATIONS
Model
Platform Size
Capacity
Increments
Divisions
Load Cell
30 lb
0.01 lb
3000
APS10
6 in x 10 in
15 cm x 25 cm
15 kg
0.005 kg
3000
TSP-15kg
APS160
10 in x 10 in
25 cm x 25 cm
160 oz
0.1 oz
1600
TSP-10kg
15 lb
0.01 lb
1500
APS15
10 in x 10 in
25 cm x 25 cm
7.5 kg
0.005 kg
1500
TSP-10kg
30 lb
0.01 lb
3000
APS30
12 in x 14 in
31 cm x 36 cm
15 kg
0.005 kg
3000
TSP-15kg
70 lb
0.02 lb
3500
APS70
12 in x 14 in
31 cm x 36 cm
31 kg
0.01 kg
3500
TSP-30kg
150 lb
0.05 lb
3000
APS150
12 in x 14 in
31 cm x 36 cm
60 kg
0.02 kg
3000
TSP-100kg
250 lb
0.1 lb
2500
APS250
18 in x 18 in
46 cm x 46 cm
125 kg
0.05 kg
2500
TSP-100kg
Power Requirements:
100 to 240 VAC 50/60Hz 12 VDC 1A wall plug-in UL/CSA listed
AC power adapter (Cardinal part number 6800-1045)
Operating Environment: Temperature Range: 14º to 104º F (-10º to +40º C)
Display:
Five digit, seven segment, 0.875 inch (22 mm) high LCD
Interfaces:
2 RS-232 serial, 1 USB-B, 1 OPOS compatible serial, most POS
system protocols included (Cardinal Scale/SMA, Avery Berkel,
NCI/Worldship, Mettler PS, Mettler SICS)
Options
Model APSWIFI – WiFi
Model APSRD – Remote Display w/6ft. cable
Model APSBLU – Bluetooth
Model BT1214 / BT1818 – Ball Top Transfer
Certifications
This equipment is certified to comply with the requirements for a Class III
device by the National Conference on Weights and Measurements (Certificate
Number: 14-057).
