Cardinal C15, Operation Manual

8526-M260-O1 



 C Series Operation 

9

OPERATION, CONT. 

Counting 

Weight of Sample is Unknown 

1.  With the scale in the Weight mode, place the sample on the scale platform. 

2.  On the numeric keypad, enter the number of pieces in the sample. 

3.  While the display is blinking, press the SAMPLE SIZE key.

4.  The display will change to show 

Sannp

 and then show the average piece weight and 

number of pieces.

5.  Add the pieces to be counted and read the total count on the PIECES display.

6.  Remove the pieces from the scale.

7.  Press the C / 

  key to complete the counting operation and return to the Weight 

mode.

 
Sample Weight is Known 

1.  With the scale in the Weight mode, using the numeric keypad, enter the piece weight of 

the sample. 

2.  Press the SAMPLE WEIGHT key.

3.  Add the pieces to be counted and read the total count on the PIECES display.

4.  Remove the pieces from the scale.

5.  Press the C / 

  key to complete the counting operation and return to the Weight mode.

 
Insufficient Sample 

IMPORTANT!  If the sample weight is too small the PIECES display will show 

------

 (six dashes) for a few seconds and then the Insuf Sample annunciator 

will illuminate.  Continued use of the scale with the Insuf Sample 

annunciator illuminated, will result in an “inaccurate” count.  Press the C / 

key to cancel the counting operation and return to the Weight mode.  Increase 
the number of pieces for the sample and repeat the counting operation to 
achieve an “accurate” count.