8
Assembly
Figure 5
Locate bag labeled Figure 5. Connect 7 Pin,
3 Pin and Grounding cables. Refer To Figure
5 and 5a.
Attach Console to Console tube using four
M5*12mm Philips Head Screws.
Note:
Ensure that all wires are secure
inside console. Be careful not to pinch wires.
7 PIN
CONNECTOR
Figure 4
Locate bag labeled Figure 4. Slide Tube
down into Main Frame. Secure using three
M8*50mm Hex Head Bolts. Cable should
extend thru bottom and top of Console
Tube.
Figure 4
3 PIN
CONNECTOR
CONSOLE
CABLES
7 PIN
CONNECTOR
3 PIN
CONNECTOR
2 GROUND
CONNECTORS
Figure 5a
Figure 5
GROUNDING
TERMINALS
M8*50mm HEX BOLT