20
User Manual: xr100+_eng
Cardioline S.p.A.
Via Linz,151
38121 Trento (TN)
info@cardioline.it
www.cardioline.com
Sales office:
Via F.lli Bronzetti, 8 20129 Milano (MI) Italy tel.+39 02 94750470
fax +39 02 94750471
xr100+
7.2 Operating Modes with Control Terminal P
Ergometers with control terminal P support the following
operating modes:
PC Mode
An external device (e.g., an ECG recorder, a PC-based ECG
system) controls the ergometer – no intervention at all is
required at the ergometer.
Ergometry
The ergometer runs an automatic exercise test – some of
the corresponding test protocols are user-configurable and
stored in the system.
(see chapter 7.2.4 “Settings with Control Terminal P” on
page 24)
Manual
The ergometer is controlled manually, i.e., the user per-
forms all load changes via the keypad.
Settings
Used to configure the ergometer.
7.2.1 PC Mode
Use the softkeys on the right and left (
↑
↓
) to position the
bar cursor on
PC Mode
and confirm the selection with
Select
.
Figure 7 – 4: Main Menu
The display shows the start screen – the ergometer is waiting
for commands from the external ECG unit.
Figure 7 – 5: Start screen
