BX
70i
9
+
The equipment should be placed on a level and solid surface, any unevenness in
the floor should be leveled out.
+
A floor protective mat / equipment underlay can help to protect high-quality floor
coverings (parquet, laminate, cork, carpets) from dents and sweat and can help to
level out slight unevenness.
2
ASSEMBLY INSTRUCTIONS, MAINTENANCE AND CARE
2.1
General instructions
+
Please check if all parts and tools belonging to the equipment are included in the
delivery and if there is any transport damage. If there are any complaints, please
contact your contract partner directly.
+
Some of the nuts and bolts to be used in assembly are already pre-mounted in
order to make set-up as easy as possible.
+
The equipment must be assembled by adults. In case of doubt, ask for assistance
from another person with technical skills.
+
Keep children away from the equipment during assembly, because small parts are
included in the delivery and may be swallowed.
+
Make sure that you have enough space (at least 1.50 m) in every direction during
assembly.
+
Do not leave any tools and packaging materials like plastic sheeting laying around
to avoid danger of suffocation for children.
+
Assemble the equipment on an underlay mat or on the cardboard packaging in
order to avoid damage to the equipment and to the floor (scratches).
+
Before starting assembly, all individual parts should be placed on the floor next to
each other.
+
Read the assembly instructions carefully and assemble the equipment according
to the illustrations. Proceed carefully and cautiously.
+
First loosen all parts and check for their correct fitting. Then tighten the screws
using a tool.
+
Modifications to the design or improper repairs may pose a hazard to the user and
should not be carried out. The product warranty may be void as a result.
+
Only authorized service technicians are permitted to carry out all servicing and/or
repairs – it excludes maintenance and care.
+
Damaged or worn components may impair your safety and the lifespan of
the equipment. You should therefore immediately replace damaged or worn
components. Please contact your contract partner in such a case. The equipment
should no longer be used until it has been repaired. When needed, only use
original cardiostrong® spare parts.
