EX
90
13
2.3
Assembly
Before assembly, take a close look at the individual assembly steps shown and carry out the assembly
in the order given.
L
NOTICE
First loosely screw all parts together and check that they fit properly. Tighten the screws using
the tool only when you are instructed to do so.
Step 1:
Unpacking
1. Place box flat on the ground, remove cover.
2. Unpack handles, side supporting bars, pedal bars and operating instructions.
3. Remove the upper foam parts (1) and (2) and take out the console, console supporting tube,
console mast, pedal supporting bars and hardware bag. First leave the main frame (A) and lower
foam parts (3) and (4) in the box.
L
NOTICE
For safety reasons, the pedal bars are just to be released with the respective control knob once
you are asked to do so at the end of the instructions.
Polysterene (1)
Polysterene (2)
Summary of Contents for CST-EX90
