EX
90
15
Step 4:
Assembly of the left side bar (C1) and covers
1. Connect the left side bar (C1) on
the main frame (A) with a screw (J8)
on top and two screws (J2) and the
holder (F2) on the bottom (see step
3).
2. Now you can tighten all of the
screws from the previous steps (F5,
J8 and J2).
3. Loosen the two screws (F6) from the
main mast (F1).
4. Mount the covers (F3 and F4) on the
main mast (F1) with the previously
loosened screws (F6).
Step 5:
Assembly of the pedal bars
1. Connect the right pedal bar (B2)
on top with the main frame (A)
and mount this with the nuts (J4),
washers (J9) and screws (J3); see
figure C.
2. Mount the pedal bar on the bottom
of the main frame with a bolt (J5), a
washer (J9) and a nut (J4); see figure
D.
3. Tighten the bolt (J5) and the nut (J4);
see figure E.
4. Repeat the process for the left pedal
bar (B1).
Summary of Contents for CST-EX90
