14
FX
30
Step 2:
Assembly of the Console Mast
1. Guide the Computer Cable (36) with the
cable ties through the Console Mast (11)
and pull it through the console bracket
plate.
2. Insert the Console Mast (11) into the frame
and mount it with six Button Head Socket
Bolts (80), six Split Washers (111), four Flat
Washers (105) and two Curved Washers
(113).
3. Remove the cable ties from the Computer
Cable (36) and inser the Computer Cable
(36) and the two Handpulse Cables (40)
into the Console (35).
4. Mount the Console (35) to the bracket
plate with four Phillips Head Screws (84).
Make sure to not pinch the cables.
Step 3:
Assembly of the Lower Handle Bars
1. Mount the left Lower Handle Bar
(9) to the left shaft and the right
Lower Handle Bar (10) to the right
shaft of the Console Mast (11) with
two Hex Head Bolts (74) and two
Flat Washers (102).
2. Loosen the Rod End Shaft (18)
from the two Conntecting Arms.
Mount the Lower Handle Bars (9
& 10) to the Connectig Arms each
with one Rod End Shaft (18), one
Hex Head Bolt (142) and one Flat
Washer (105-1).
