13
2.3
Assembly
Before assembly, take a close look at the individual assembly steps shown and carry out the assembly
in the order given.
L
NOTICE
First loosely screw all parts together and check that they fit properly. Then tighten the screws
using the tool only when you are instructed to do so.
Step 1:
Assembly of the Front and Rear Stabilizers
1. Fix the front stabilizer (2) onto the main frame (1) with four screws (9), four spring washers (7)
and four washers (8) ( Fig. 1-1).
2. Take the styrofoam from the packaging and place it underneath the main frame (1) (Fig. 1-2).
3. Fix the rear stabilizer welding set (43) onto the main frame (1) with two screws (9), two spring
washers (7) and two flat washers (18) (Fig. 1-3).
4. Fix the rear stabilizer welding set (43) onto the main frame (1) with two screws (9), two spring
washers (7) and two curved washers (6) (Fig. 1-3).
5. Remove and dispose the styrofoam (Fig. 1-4).
Summary of Contents for CST-FX70
