31
4
STORAGE AND TRANSPORT
4.1
General Instructions
⚠
WARNING
+
The storage location should be chosen so that improper use by third parties or children can
be prevented.
+
If your equipment does not have transportation wheels, the equipment must be disassembled
before transportation.
࣑
ATTENTION
+
Make sure that the equipment is protected from moisture, dust and dirt in the selected
storage location. The storage location should be dry and well ventilated and have a constant
ambient temperature between 5°C and 45°C.
4.2
Transportation Wheels
࣑
ATTENTION
If you want to transport your equipment over particularly sensitive and soft floor coverings, such
as parquet, planks or laminate, lay out the transport route with cardboard or similar to avoid
possible floor damage.
1. Stand behind the equipment and lift it until the weight is transferred to the transportation
wheels. After that, you easily can move the equipment to a new position. For long transport
distances the equipment should be disassembled and safely packed.
2. Select the new location by following the instructions in the section 1.4 of this manual.
4.3
Folding Mechanism
⚠
WARNING
+
The treadmill is equipped with high-pressure shock absorbers that can cause the treadmill
to suddenly open if handled incorrectly. For more information, refer to the general assembly
instructions.
+
Do not lift the treadmill by the running mat or the rear transporting wheels. These parts do
not lock and are difficult to grab.
L
NOTICE
The treadmill is foldable and thus saves space when it is stored. It also makes it easier to transport.
Summary of Contents for CST-TX90-2-HD
