10
TX
40e
2.2
Errors and error diagnosis
The equipment runs through regular quality controls during production. Nevertheless, errors or mal-
functions on the equipment may occur. Individual parts are often the cause of faults and replacement
is usually sufficient. Please use the following overview to see the six most common errors and how
to repair them. If the equipment still does not work properly, please contact your contract partner.
Error
Cause
Solution
Console only shows
lines
Safety key missing
Check if the safety key is inserted and
place it in
Running belt tilted
Running belt not aligned
Laufmatte gemäß Anleitung zentrieren
Running belt slips
through/stops
Belt tension/lubrication not ok Check belt tension/lubrication in accor-
dance with the instructions
Scraping noises
Running belt scrapes, because
it is not aligned
Align running belt in accordance with
the instructions
Display does not show
anything
Check plug connections
(cables)
Mains switch on “on”, make sure that the
safety key is inserted
No pulse display
Sources of interference in the
room
With chest strap
Unsuitable chest strap
Position of the chest strap
incorrect
Batteries empty
Remove sources of interference (e. g.
mobile phone, speakers, WLAN, mover
robot, vacuum cleaner robot etc.)
Use suitable chest strap (see
recommended accessories)
Reposition chest strap and/or moisten
electrodes
Change batteries
Summary of Contents for TX40e
