CONNECTION TO MOBILE PHONES, GPS DEVICES AND MP3 PLAYERS
Your unit has two
Bluetooth
channels for connection to mobile phones, GPS devices and music
players with A2DP.
PAIRING BLUETOOTH CHANNELS 1 AND 2
1. Make sure
Bluetooth
is enabled on your phone/GPS/MP3 player.
2.
To pair Bluetooth Channel 1
– In Standby, press
+
for 5 seconds until the RED and BLUE LEDs
begin rapidly alternating.
To pair
Bluetooth Channel 2
– In Standby, press
-
for 5 seconds until the RED and BLUE
LEDs begin rapidly alternating.
When pairing a GPS, once LEDs begin rapidly alternating, tap .
3. Search for
Bluetooth
devices on your phone/GPS/MP3 player.
4. Select “
Louis Edition
” and enter 0000 (four zeros) if required.
5. After pairing has succeeded, the LED will begin flashing slowly in BLUE.
6. If Pairing is not completed within 2 minutes, the unit will return to Standby.
• If you have paired 2 different mobile phones directly to your unit, you will need to set one as
default for making calls.
• If your GPS supports it, you can pair the second mobile phone directly to the GPS and then pair
the GPS to your unit, and so connect both mobile phones and the GPS.
• After pairing, you may need to tap
W
to connect.
MOBILE PHONE
Answer a call
Tap
W
or say any word loudly to answer by VOX
Reject a call
Remain silent for 15 seconds, or press and hold
W
for 2 seconds
End a call
Tap
W
Voice Dial*
(if supported by mobile phone)
Tap
W
and
v
simultaneously and follow the prompt from
the mobile
Redial*
Press
W
and
v
for 2 seconds
Hot-Dial
†
Tap
W
three times
Set default phone
When on a phone call, press
+
for 5 seconds
Toggle default phone
In Standby, press
W
for 5 seconds
*
This feature is not available during mobile calls
†
To use the Hot-Dial, first configure the number via the
Cardo Community
or
Cardo SmartSet
App
English
scala rider
®
Qz
|
13
