1
Cardo S-800
™
8. Troubleshooting
NOTE:
For most problems, it is recommended as a first step that
you turn the headset off for one minute and then on again. If that
fails, try pairing the headset and phone again.
Problem
Action
Pairing fails
1. Delete S-800 from your paired device list in your phone
(if it is listed).
2. Turn off the mobile phone and Headset.
3. Take the battery out of the phone and put it back.
4. Repeat the pairing process as described in
Pairing your Headset
section above.
Can’t
answer
phone calls
or perform
voice
dialing
(Assuming your mobile phone supports Voice Dialing) :
1. Make sure your Headset is turned ON and in Standby
mode while the blue light indicator flashes slowly.
2. Verify that the
Bluetooth
function on your phone is set
to ON.
3. Verify that the S-800 is the correctly paired Headset to
your mobile phone (refer to the phone manual).
4. Connect the headset to the phone as described above.
5. Check “Definitions” or “Settings” on your mobile phone
for Voice Dial Enablings.
6. Perform the pairing process as described in
Pairing
your Headset
section and check again.
