5
Cardo S-800
™
5. When prompted, enter the
passkey “0000” (4 zeros)
and press
“OK”
to complete the pairing.
6. When the pairing is complete, your phone will confirm that the
pairing was successful and the headset’s LED status indicator
will begin flashing slowly in
blue
.
You should now be able to make and receive calls using your
headset. To initially connect the headset to your phone, you may
need to tap the CTRL Button once on the headset.
IMPORTANT:
If the pairing is not completed within 2 minutes while
the Pairing Mode is activated, the headset will return to Standby
mode, flashing
blue
once every three seconds and you must start
the Pairing process again from Step 2 above.
NOTE:
Your headset can pair with up to 8 phones, and will
automatically connect to the last phone connected to the headset. To
connect to a different paired phone, go to the
Bluetooth
menu of the
active phone and disconnect the headset. Then go to the
Bluetooth
menu of the phone you wish to connect and connect the headset by
selecting it from the list of Paired Devices.
