7
Cardo S-800
™
4. Using your Headset – Basic Functions
Function
Required
Action
Turn ON/OFF the
headset
Press and hold the Power Button for at
least 4 seconds
Answer a call
Tap the CTRL Button*
End a call
Tap the CTRL Button
Make a call from
your phone
Dial normally from your phone and the
call will be transferred to the headset
(subject to phone settings).
Make a call using
Voice Dial
During Standby, tap the CTRL Button,
wait for the tone and say the name
of the person you wish to call.
(Your
mobile phone must support the Voice
Dial feature.)
Increase the volume
Move the MFW up by steps. When you
hear a beep, it is at maximum.
Decrease the volume
Move the MFW down by steps.When
you hear a beep, it is at minimum.
Mute the microphone
During a call, tap the MFW inwards to
turn on/off mute.
* NOTE:
Wait until you hear the incoming call on the headset (not
only on the phone)
