Cardo Systems Scala 700LX, Quick Manual

8

Changing the Wheel orientation

The default configuration of the Headset is designed for use on your
right ear. This means that clicking up on the Wheel towards the small

‘+’ sign on the Headset increases the volume one step at a time, while

clicking down towards the ‘-’ sign on the Headset decreases the volume
one step at a time.

If you wear the Headset on your left ear, the scala-700LX allows you
to change the Wheel orientation from right to left ear, so that pressing
the Wheel up still increases the volume, and pressing down decreases
the volume.

To set the Headset for left ear orientation: Make sure the Headset is
turned off. Now turn it on by pressing and holding the Control button
while pressing in and holding the Wheel for 4 seconds. Once you see
3 blue flashes, the Headset is powered on and you may release the
buttons.

NOTE: The Headset will revert to its default right ear configuration once
it is turned off. In order to regularly use the Headset in left ear configuration,
always turn on the Headset using the C Wheel procedure above.

If you choose to wear the Headset on your left ear but do not wish to
change the Wheel orientation, the Wheel will function in the reverse order,
i.e. turning down will increase volume, turning up will decrease volume.