CONTENTS OF RETAIL BOX
INTRODUCTION
Congratulations, and thank you for choosing the
scala rider Q2
Bluetooth®
Headset for bikers. This Manual will help you operate the
headset, but you should first familiarize yourself with the
Bluetooth
functionality of your cellular phone and/or GPS device before using
the
scala rider Q2
.
The retail box of the
scala rider Q2
contains one headset unit. When
paired with another
scala rider Q2
, the headsets can be used as an
Intercom at a range of up to 1,640 ft (500m), subject to terrain and
external conditions.
The
scala rider Q2
offers the following uses:
1.
Bluetooth
headset for mobile phone communication
,
supporting headset* and Handsfree* profiles (10m range)
2.
Bike-to-Bike Intercom Communication
with another Q2
unit (up to 1,640 ft. / 500 m range) in Full Duplex** mode
[purchased separately]
3.
Turn-by-Turn GPS Navigation instructions
and Streaming
Audio from compatible
Bluetooth
devices
4.
FM Radio
– built in FM radio receiver with six preset stations
5.
MP3 Connectivity
– Listen to your
MP3
player while riding
The
scala rider Q2
can establish an audio connection with one
Bluetooth
device at a time. Please read the section
“Using the
Headset”
to see how you can switch the audio connection between
the paired devices.
____________________
* Mobile phones that do not support the
Bluetooth Handsfree profile
may
prevent you from using the Redial and Call Reject features
** Full duplex calls allow you to speak and hear the other party speak
simultaneously
MC – Multi-Connection
• Radio On/Off/change stations
• Initiate/Terminate Buddy
Intercom call with Primary or
Secondary Buddy
CTRL – Control Button
• Power On, Power Off
• Answer/End Call
Charging
Jack
Volume
Down
Volume
Up
NOTE:
The
scala
rider Q2
is also avail-
able in a cord-mounted microphone
version to better fit certain full-faced
helmets with tight chin sections.
Headset
Helmet Clamp
Tab
Sliding Plate
Microphone
Right Speaker
(long cord)
Left Speaker
(short cord)
MP3 Jack
Back
Plate
3
scala rider
®
Q2
™
English
