T
his Quick Guide is not a substitute to the user manual and addresses only
a limited scope of features and functions of your
scala rider Q3
.
This reference guide may be useful to look up some basic functions and
commands while you are on the road and have no access to the user manual.
This Quick Guide can be printed and folded for easy reference, or it may be
viewed directly on your smartphone.
Intercom
Button
(“IC”)
Music / Mobile
Button
(“MM”)
Volume Up
(
“V+”
)
Volume Down
(
“V-”
)
1
| GENERAL FUNCTIONS
Power ON / OFF
Press “IC” for 2 seconds
ON: 3 BLUE f Ascending tone
OFF: 3 RED f Descending tone
Volume
Tap “V+” or “V-” to adjust volume of current
audio source
Mute
Tap “V+” and “V-” simultaneously
Battery level indicator
In Standby, press “V+” for 2 seconds
• Blue LED = Full charge
• Purple LED = Half charge
• Red LED = Almost empty
Enable / Disable VOX
(For Intercom calls only)
In standby, press “V+” and “V-” simultaneously
for 2 seconds
ENABLED: Blue flash for 2 seconds
DISABLED: Red flash for 2 seconds
A2DP audio / Intercom
priority
Via the Voice Menu or the
Cardo Community
Enable/Disable
Click-to-Link® (CTL)
(Enabled by default)
Via the Voice Menu or the
Cardo Community
Enable/Disable Spoken
Status Announcements
(Enabled by default)
Via the Voice Menu or the
Cardo Community
2
Enter Voice Menu
In standby, press “MM” and “IC”
simultaneously for 5 seconds. Follow the
audio instructions.
Exit Voice Menu
Press “MM” for 2 seconds
3
| LED
STATUS
None
scala rider is OFF
1 BLUE flash every
3 seconds
Standby mode
No active audio sources
2 BLUE flashes every
3 seconds
Active mode – Call in progress / music or
other audio source is ON
1 RED flash every
3 seconds
Standby mode – Battery is low
2 RED flashes every
3 seconds
Active mode – Battery is low
Solid RED
Charging
4
| MOBILE PHONE
Answer a call
Tap “MM” or speak any word loudly to
answer by VOX
Reject a call
Remain silent for 15 seconds, or press and
hold “MM” for 2 seconds
End a call
Tap “MM”
Voice Dial*
(if supported by mobile
phone)
Tap “MM” and “IC” simultaneously and
follow the prompt from the mobile
Redial*
Press “MM” and “IC” for 2 seconds
Hot Dial*
Tap “MM” 3 times
Set default phone
When on a phone call, press “V+” for
5 seconds
Toggle default phone
In Standby, press “MM” for 5 seconds
*This feature is not available during mobile calls
5
| A2DP MUSIC AND FM RADIO
Turn on A2DP Music
In Standby, tap “MM”
Turn on Radio
In Standby, double tap “MM”
Pause / Stop Audio
Press “MM” for 2 seconds
Next Track / Station
With audio ON, tap “MM”
Previous Track /Station* With audio ON, double tap “MM”
Music Sharing (via A2DP only)
[SENDER] Start/Stop
sharing your music
During A2DP music playback, press “V+” or
“V-” for 2 seconds
[RECEIVER] Stop music
sharing
Press “V+” or “V-” for 2 seconds
*With some phones you may need to repeat this action
6
|
PAIRING BLUETOOTH DEVICES: MOBILE PHONE/
GPS/A2DP MUSIC PLAYER
Bluetooth Channel 1
pairing mode
In Standby, press “V+” for 5 seconds
Bluetooth Channel 2
pairing mode
In Standby, press “V-” for 5 seconds
communication in motion
®
Q3 / Q3 MultiSet
™
