Cardo Systems SCALA RIDER TEAMSET, User Manual

9

English

SCALA RIDER

® 

TeamSet™  | 

NOTE:

 If your 

Bluetooth

 mobile phone is paired to a 

Bluetooth

 GPS 

device, not directly to the 

SCALA RIDER TeamSet

, some of the above 

Phone functions may not be compatible.

INTERCOM FUNCTIONS–Driver’s Unit

G E N E R A L     F U N C T I O N S

DESIRED RESULT:

REQUIRED ACTION:

Start using the intercom

During standby, start talking loudly to  

activate the feature

Terminate operation of 

Intercom

Stop talking. The audio  connection will be 

terminated within 25 seconds.

Conference Call (add 

passenger to an active call)

During an active phone-call, tap the 

intercom button.

End Conference Call 

(release passenger from a 

conference call)

During a conference call, tap the intercom 

button.

Note:

 In case the person on the other side of the intercom is not responding and 

you start talking, 2 beeps will alert you that the other side is not available

STATUS LIGHTS

STATUS LIGHT

STATUS

None 

Headset is off

Alternating Red/blue flashes 

Mobile phone/GPS Pairing mode

1 blue flash every 3 seconds 

Standby – No call is in progress

2 blue flashes every 3 seconds 

Call is in progress

1 red flash every 3 seconds 

Battery is low

2 red flashes every 3 seconds 

Low battery while a call is in progress

Solid red 

Charging

PASSENGER’S UNIT FUNCTIONS

USING THE HEADSET

DESIRED RESULT:

REQUIRED ACTION:

Turn on the headset

Press the CTRL Button steadily for at least 3 

seconds. Led indication: three blue flashes. 

Audio feedback: Ascending tone (low-high).

Turn off the headset

Press the CTRL Button steadily for at least 3 

seconds. Led indication: three red flashes. 

Audio feedback: Descending tone (high-low).

Start using the Intercom

During standby, start talking loudly to 

activate the Intercom

Terminate operation of 

Intercom

Stop talking. The audio connection will be 

terminated within 25 seconds.

Enable/disable Always-on 

Intercom

During standby tap the Control Button. 

One tone = intercom enabled. Two tones = 

intercom disabled.

Increase Intercom volume

Tap the Volume Up Button

Decrease Intercom volume

Tap the Volume Down Button

Note:

 In case the person on the other side of the intercom is not responding and 

you start talking, 2 beeps will alert you that the other side is not available

STATUS LIGHTS

STATUS LIGHT

STATUS

None 

Headset is off

One blue flash every 3 seconds 

Headset is on

Steady red (Charger is connected) 

Headset is being charged

Steady red (Charger is not 

connected) 

Headset in Intercom pairing 

mode