DRIVER’S UNIT FUNCTIONS (continued)
DESIRED RESULT:
REQUIRED ACTION:
I
N
T
E
R
C
O
M
F
U
N
C
T
I
O
N
S
Start using the intercom
During standby, start speaking loudly to activate the
intercom
Terminate the operation
Stop speaking. The audio connection will be terminated
of intercom
within 25 seconds.
Conference Call (add
During an active phone call, tap the Intercom Button.
passenger to an active
call)
End Conference Call
During a conference call, tap the Intercom Button.
(release passenger
from a conference call)
Enable/Disable Voice
Long press the volume up and down buttons until you
Command feature
hear a beep. The default status is Voice Command
enabled.
PASSENGER’S UNIT FUNCTIONS
DESIRED RESULT:
REQUIRED ACTION:
Turn on the headset
Press the Control Button steadily for at least 3 seconds
Turn off the headset
Press the Control Button steadily for at least 3 seconds
Start using the intercom
During standby, start speaking loudly to activate the
intercom
Terminate operation
Stop speaking. The audio connection will be terminated
of intercom
within 25 seconds.
Enable/disable
During standby, short press the Control Button.
Always On Intercom
One tone = Always On intercom.
Two tones = Voice Controlled (VOX) intercom
Increase intercom volume
Short press Volume Up Button
Decrease intercom volume
Short press Volume Down Button
10
