Battery does not provide at
1. Make sure your scala-rider headset is fully
least five hours of talk time
charged. Charging time is up to 5 hours for an
empty battery. When the headset is connected
to the charger and it is fully charged, the red
Status Light turns off.
2. You may have inadvertently left the
Always-On Intercom on.
I’m trying to reject incoming
1. Make sure the VC feature is enabled
calls by remaining silent, but
2. Reject feature works only with mobile phones
the phone continues to ring.
that support
Bluetooth
hands-free profile. Make
sure your mobile phone supports this profile.
Red Status Light does not
1. Make sure the Charging Jack is firmly plugged
light steady when charger
into the headset and wait 5 seconds
is connected.
2. Disconnect the Charging Jack wait a few
seconds and plug it back in.
3. When the headset is fully charged the red light
turns off.
I hear crackling noises
1. Possibly caused by nearby interference. If you
have a GSM phone and your headset is too
close to phone, noises may be heard.
2. Headset and mobile phone are more than 30
ft. (10 m) apart or there are major obstacles
(such as concrete walls) between the headset
and mobile phone.
Sound deteriorates when the
Some mobile phones emit weaker
Bluetooth
phone is in my back pocket.
signals than others, resulting in reduced sound
quality, especially when the phone is close to your
body. Suggestion: Move the phone to your breast
14
