background image

DRAFT 

 

 

  Page 12 of 19 

FAQs 

 

What is the Cardo 

scala-rider

 headset? 

The scala-rider wireless headset is a comfortable, stylish and easy to use accessory to a 
Bluetooth

TM

 mobile phone or smart-PDA, designed for use with motorcycle helmets.  

 

Do I need an Adapter if I already have a Bluetooth enabled cell phone? 

No. Your scala-rider headset communicates with virtually every Bluetooth phone. 
 

How does the 

scala-rider

 headset work? 

Once the scala-rider headset is “paired” to your Bluetooth enabled mobile phone, the two 
devices communicate wirelessly using Bluetooth technology. 
 

If I want to keep my non-Bluetooth mobile phone, can I still use the 

scala-rider

 with my mobile phone? 

You can hold on to your non-Bluetooth mobile phone and still enjoy the benefits of the 
headset, if you also purchase the 

scala Bluetooth Adapter

. The BT Adapter is very 

small and plugs directly into the headset jack of most non-Bluetooth phones, thereby 
enabling that phone to communicate wirelessly with your headset. 
 

Is the battery removable? 

The battery is not removable and you should never try to open the headset. Let only 
Authorized Service Centers maintain or service your device. Please refer to our website 
for instructions at the end of your battery life. 
 

Do I need to turn my headset off or leave it on when it is recharging? 

Your headset may stay on or off during the charging process, according to your 
preference. 
 

 

When I turn on my cell phone, do I need to pair or link my cell phone 
and headset again? 

Once your mobile phone and headset are paired, you will not have to pair it 
again. You will only need to implement the simple steps of reconnecting your phone and 
headset each time either or both are turned off or have moved more than approximately 
30 feet (10 meters) apart from each other.  
 
 

Will other Bluetooth phones interfere with my 

scala-rider

 headset? 

Can they eavesdrop? 

No. Once you are paired, your identity is known only to the mobile phone you use and no 
other Bluetooth phone can hear your audio signals. 
 

Can I wear 

scala-rider

 in the rain and under snowy conditions? 

Yes, the scala-rider is weather protected but you should avoid excessive exposure to the 
elements.  
 

Summary of Contents for ScalaRider




















Reviews: