background image

DRAFT 

 

 

  Page 14 of 19 

(See Section 6.4). 
 
Problem  
I'm trying to reject incoming calls by remaining silent, but the phone continues to ring. 
Action 
1.  Make sure the VR feature is enabled (See Section 7). 
2.  Reject feature works  only with mobile phones that support Bluetooth 

hands-free 

profile. Make sure your mobile phone support this profile. 

  
Problem  
I'm trying to reject incoming call by remaining silent, but the call gets answered anyway. 
Action 

1.  Use the larger microphone sponge 
2.  Close the helmet visor 
3.  Feature works well up to limited speed (See section 7). 

 
Problem  
I can not perform Redial. 
Action 

1.  Make sure the call list on your mobile is not empty. 
2.  The Redial feature works only with mobile phones that support the Bluetooth 

hands-free 

profile. Make sure your mobile phone support this profile. 

 

  
Problem 
Battery does not provide at least five hours talk time. 
Action 
Make sure your scala-rider headset is fully charged.  
Charging time is up to 3 hours for an empty battery. When the headset is connected to 
the charger and it is fully charged, the red light indicator turns off. 
 
 
 
 
 
Problem 
Red LED does not light steady when charger is connected. 
Action 
1. Make sure the charger’s DC jack is firmly plugged into the headset. 
2. Disconnect the charger’s DC jack, wait a few seconds 
and plug it back in. 
3. If the headset is fully charged the red light turns off. 
 
Problem 
I hear crackling noises 
Action 

Summary of Contents for ScalaRider




















Reviews: