5. SETTING UP AND USING DMC INTERCOM GROUPS
You can manage DMC intercom groups to suit your riding requirements, such as creating groups, joining groups, leave
and rejoin groups or change your active group.
DMC intercom groups are created and deleted by a group creator. Each group can have up to four riders: one group
creator and a maximum of three group members.
Through the SmartSet app, group creators can manage up to six groups simultaneously, and group members can join
up to six groups, with one group active at a time.
When creating a group, all members should be within 3 meters / 10 feet of the creator. The group continues
functioning even if the creator is no longer available.
If a rider's connection is lost, the rider remains part of the group and reconnects automatically once in range.
If you purchased the SMART
H
DUO, the retail package contains two units belonging to the same DMC intercom
group.
5.1 CREATING DMC INTERCOM GROUPS
When creating a DMC group, you must coordinate with the other riders who will be the group creator. The group
creator then creates the group (as defined following), and once it is created, the other riders join the created group as
members (see
Joining DMC intercom Groups
on page 12).
To create a DMC group through the unit buttons:
1.
Confirm your SMART
H
is in DMC intercom mode (LED flashes green slowly).
If your SMART
H
is not in DMC intercom mode, press
and
.
2.
Press
for 5 seconds. LED flashes green quickly.
3.
Tap
. LED flashes red and green quickly.
4.
Other members must join the group within 2 minutes (for SMART
H
, see
Joining DMC intercom Groups
on page
12; for other Cardo products that support DMC, see their respective manuals at
cardosystems.com/product-
manuals/
).
5.
After each member joins successfully, the LED flashes purple.
After grouping is completed, the DMC intercom conference starts automatically.
To create a DMC group through the SmartSet app:
1.
Make sure that your unit is paired to the mobile device on which the SmartSet app is installed.
2.
Slide
to
. SMART
H
is in DMC intercom mode
3.
Tap
.
4.
Tap
GROUP
.
5.
Tap
NEW GROUP
.
6.
Enter your New Group name and tap
OK
. Your DMC intercom group appears in group list.
7.
Tap
ADD MEMBER
.
8.
Other members can now join the group (for Cardo products that support DMC, see their respective manuals at
cardosystems.com/product-manuals/
).
11
