6. PAIRING THE BLUETOOTH INTERCOM
To connect your unit to another unit with a Bluetooth intercom, you must first pair their channels. Once paired, the
units automatically recognize each other whenever they are in range (line of sight up to 1.2 km / 3,900 ft subject to
terrain).
●
Pairing a channel replaces any existing paired unit on that channel with the new unit.
●
If you purchased the SMART
H
DUO, the retail package contains two pre-paired units in DMC mode.
●
The Intercom range with other models is limited to the distance of the unit with the shorter range.
For details on how to pair and use your SMART
H
with other Cardo units, go to
www.cardosystems.com/smarthcomcompatibility
.
6.1 3-WAY AND 4-WAY BLUETOOTH INTERCOM CALLS
In addition to standard 2-way Bluetooth intercom calls, you can use the SMART
H
for 3-way and 4-way Bluetooth
intercom calls on Cardo and non-Cardo units. SMART
H
allows full-duplex Bluetooth intercom communication for up to
3 riders or 4 riders/passengers to communicate up to 1.2 km / 3,900 ft in line of sight (subject to terrain).
In a 3-way Bluetooth intercom, you are connected to two riders/passengers and each of those riders are connected
only to you. You can call each of the two riders/passengers. If you are already in a Bluetooth intercom call with one
rider/passenger, just add another. All three riders/passengers are now connected in a 3-way Bluetooth intercom call.
In a 4-way intercom conference call, there are two pairs of riders. In each pair, the riders are connected to each other
through channel A. In each pair, one of the riders (riders 2 and 3 in the figure below) is also connected to a rider in the
other pair through channel B. All four riders are now all connected in a 4-way Bluetooth intercom call.
15
