●
To reset all Bluetooth intercom pairing, select the menu option "Reset Intercom Channels Pairing".
6.4 SETTING UP ONE+8 INTERCOM
You can use One+8 Intercom for calling and switching between up to 8 riders. The riders are called "buddies". Using
Cardo Community™ (see
Configuring Your SMARTH Basic Settings through Cardo Community
on page 41), you can to
set your name, preset your buddies in your "buddy list" with any name you choose and set each buddy's phone
number.
If a phone number is set for a buddy, SMART
H
will call the buddy by phone if Bluetooth intercom is not available and
if:
●
SMART
H
is in Bluetooth intercom mode.
●
Intercom-to-Phone is enabled (see
Personalizing Your Device
on page 33).
You can then connect with your buddies directly by saying a buddy name from your buddy list. If your buddy is not in
intercom range, One+8 Intercom automatically makes a phone call to the buddy.
Cardo recommends to define your unit's name.
6.4.1 MANAGING YOUR ONE+8 INTERCOM BUDDY LIST
You must add riders to your buddy list before using One+8 Intercom.
To add a buddy to your One+8 buddy list through the unit buttons:
a.
Press
and
for 5 seconds. The LED flashes purple.
b. The unit confirms that the buddy is added to the buddy list and the LED flashes purple for 2 seconds.
To add a buddy to your One+8 buddy list through the SmartSet app:
a.
Make sure that your unit is paired to the mobile device on which the SmartSet app is installed.
b. Tap
.
c.
Tap
Bluetooth
.
If your SMART
H
is not in Bluetooth intercom mode, the SmartSet app prompts you to change to Bluetooth
intercom.
d. In
BUDDIES
, tap
.
e.
The SmartSet app prompts you to confirm you are entering Buddy Pairing mode. Tap
YES
.
To add, change or remove a buddy from your One+8 buddy list through Cardo Community:
●
In the Cardo Community (see
Configuring Your SMARTH Basic Settings through Cardo Community
on page
41), go to Buddy Lists and perform the required action.
19
