To unmute the DMC group through the SmartSet app:
1.
Make sure that your unit is paired to the mobile device on which the SmartSet app is installed.
2.
Open the SmartSet app and tap
DMC
.
3.
Tap
UNMUTE GROUP
.
To unmute the DMC group through the voice-assisted menu:
1.
Tap
and
twice.
2.
When the voice-assisted menu reaches "Unmute the Pack", tap
or use VOX.
7.1.3 STREAMING MUSIC IN DMC INTERCOM MODE
7.1.3.1 BACKGROUND AUDIO LEVEL AND AUDIO SOURCE PRIORITIES
The SMART
H
can use parallel audio streaming to stream audio from two connected sources simultaneously, so that
you can listen to your music or the FM radio while holding a DMC intercom conversation. SMART
H
automatically
manages your music and FM radio volume while using DMC intercom. SMART
H
also automatically manages DMC
intercom volume with mobile phone calls and GPS. For more information on background audio level and audio
source priorities, see
Using Parallel Audio Streaming
on page 43.
7.2 MAKING AND RECEIVING BLUETOOTH INTERCOM CALLS
●
Confirm your SMART
H
is in Bluetooth intercom mode (blue LED flashes slowly).
●
To make and receive Bluetooth intercom calls, you must first pair the Bluetooth intercom (see
Pairing the
Bluetooth Intercom
on page 15).
●
During a 3 or 4-way Bluetooth intercom conference call while riders are range (1.2 km / 3,900 ft), riders using
both Bluetooth intercom channels cannot receive phone calls, GPS instructions or listen to music while the call
is in progress.
7.2.1 MAKING A BLUETOOTH INTERCOM 2-WAY CALL
To start a Bluetooth intercom call with a passenger/rider, do one of the following:
●
To use the unit buttons:
●
To start a call on Channel A, tap
.
●
To start a call on Channel B, tap
twice.
●
To use the SmartSet app: On the
INTERCOM
screen, select the required channel (A or B).
●
To use the voice-assisted menu:
a.
Tap
and
twice.
b. When the voice-assisted menu reaches "Call Intercom", tap
or use VOX. A Bluetooth intercom call with
the passenger/rider on Channel A, B, or A+B starts.
To end a Bluetooth intercom call, do one of the following:
●
To use the unit buttons:
●
To disconnect Channels A or B, tap
.
●
To use the SmartSet app: On the
INTERCOM
screen, select the required channel to disconnect.
21
