If a new firmware version is available, follow the instructions on the screen to update your SMART
H
with the latest
features.
8.2.3 CONFIGURING YOUR FM RADIO THROUGH CARDO COMMUNITY
To configure the six FM radio preset radio stations using Cardo Community:
1.
Scroll down to
FM RADIO PRESETS
section.
2.
On
FM Band
:
●
If you are in Japan, select
Japan
.
●
Otherwise, select
Worldwide
.
3.
On the preset station you want to edit, click
.
4.
Enter the desired FM station's frequency and press
Enter
.
You can also use the left and right blue arrows on the frequency scale to update the preset frequency.
5.
To delete a preset station, click
.
Preset radio station 1 cannot be deleted.
8.3 CONFIGURING YOUR SMARTH THROUGH THE CONFIGURATION VOICE MENU
You can configure your SMART
H
using the configuration voice menu in combination with either unit buttons or using
VOX.
To configure your SMARTH through the Configuration Voice Menu:
1.
Confirm your unit is in Standby (LED flashes slowly).
In the next step, make sure you release the buttons after you hear the second beep, otherwise unit
configuration will be reset.
2.
Press
and
for 2 seconds.
3.
When the voice-assisted menu reaches your required option ("Language", "A2DP Audio Priority", "Spoken Status
Announcements", "Click-to-Link", "AGC", "RDS", "VOX Sensitivity", "VOX", "Parallel Audio Streaming", "VOX
Operation Mode"), tap
or use VOX to select.
42
