2.3 SWITCHING YOUR UNIT ON/OFF
To switch your SPIRIT HD on:
●
Press both
and
for 2 seconds.
The speaker plays an ascending tone and a voice message greets you.
The LED confirms your SPIRIT HD is on:
●
Normal battery — LED flashes blue three times.
●
Low battery — LED flashes blue three times, then red.
●
Charging — LED flashes red, blue and purple.
To switch your SPIRIT HD off:
●
Press both
and
.
The LED flashes red three times, confirming that your unit is switching off. The speaker plays a descending
tone and a voice message.
2.4 USING YOUR SPIRIT HD
You can operate the various features of your SPIRIT HD in the following ways:
●
Press a button or combination of buttons on the unit
●
Use the Cardo Connect App on your mobile device (once it is paired with the unit)
2.5 PAIRING YOUR UNIT TO BLUETOOTH DEVICES
Your SPIRIT HD has two Bluetooth channels for connection to Bluetooth devices such as mobile phones, GPS
devices, and Bluetooth music players with A2DP.
To connect your unit to a Bluetooth device, you must first pair them. Once paired, they automatically recognize
each other whenever they are within range.
5
Summary of Contents for Spirit HD
Page 1: ......
