6. OPERATIONAL INSTRUCTIONS
Please read this User Guide carefully before using the CVTIS chair.
Any person who is likely to use the equipment needs to familiarise themselves with the user instructions.
6.1 SEATING
6.1.1 Removal and Fitting.
The chair is fitted with a gap front / horseshoe seat
as standard, secured with grey snap-on clips.
To remove the seat: pull
seat upwards sharply.
To fit the seat: align the
snap-on clips and push
and/or press down firmly.
6.1.2 Adjusting the Seat Height (Attendant model only)
i. Remove the pin clip from the leg.
ii. Select the desired seat height by sliding out the
leg from the frame (This is a telescopic action).
iii. Refit pin clip.
iv. Repeat the adjustment for the other legs.
v. Ensure all legs are adjusted equally.
NOTE
:
Height adjustment can only be achieved when
the chair is not in use.
6.2 BACKREST
The backrest is not fixed to the main frame of the
chair.
To remove / fit the backrest:
Simply slide the backrest over the chair framework
6.3 ARMRESTS
The armrest is a self-supporting arm. The armrests
must not be used to help manoeuvre the chair, push
handles are supplied for this reason.
To raise the arm:
lift / fold upwards.
To lower the arm:
pull / fold downwards.
6.4 FOOTREST
Do not stand on the footrests as this may result in the
chair tipping. The footrests have been designed to be
removed or folded away to ease access to and from
the chair.
6.4.1 Removal
The footrest is designed to swing away. It is
detachable by a simple single-handed operation.
To lock: The footrest is locked in place by a V-groove
and a plastic clip.
To remove the footrest: lift upwards.
6.4.2 Adjustment
The footrests are adjustable in height:
i. Remove the footrest from the frame by pulling
upwards.
ii. Remove the black pin on the side footrest
socket.
iii. Refit pin in required hole.
iv. Refit footrest.
