http://www.caremassager.com/
8
www.caremassager.com|
Care Massager Technologies Co., Ltd.
state, then press strength increase time (30 minutes), add hotkeys to reduce time (minimum 5
minutes), set time, still waiting for the display flashing again until the stop blinking and start time,
set the time to complete, the time adjustment function for the memory type, default adjust the
time for the next work.
Scrapping mode:
press the scrapping button, button light red light, scrapping pattern was
open. (scrapping mode not startup pressure function, this model is choose to touch type)
Data memory:
products in complete you, end of the work (except abnormal power)
sequestration data automatically, after the next boot default you at the end of the last set of
working time and pattern.
Specifications
Name
Foot massager
Model
CM-Z21
Rated Voltage
DC24V/2.5A
Rated Power
45W
Time
5-30min
Troubleshooting
The problem happened when using
，
solve them according to the following methods. If it is still in
trouble, please send to the after sell centre or Authorized maintenance personnel to maintain.
Anomalies
Possible Cause
Approach
Does not work
1. No power
2. power switch is turn off
1. Set up an electric circuit
2. Turn on power switch
Stop working
1. Power outage
2. Massage time is over
15Mins
3. Keep working too long. The
massager is overheating.
4. Excessive force, massager
rollers cannot afford.
1. Check electric circuit
2. Turn on/off power again
3. Turn on/off the massager
after cool.
4. Excessive force
，
massager
rollers cannot afford.
