background image

 

 

 

 

 

 

WARNINGS AND SAFETY PRECAUTIONS

 

Read all instructions before use or repair

 

 

 

WARNING! To minimize the risk of fire, personal injury and equipment/property damage adhere 

to the following instructions:

  

1.

 

The product must only be installed and used for its intended purpose according to the 

instructions in this manual and/ or other documentation from Care of Sweden. The product 

must not be combined, assembled or repaired with parts (e.g. control unit and mattress), 

accessories or spare parts other than those described in this manual or other documentation 

from Care of Sweden. The product must not be modified in any way.

 

 

2.

 

The product must be placed and used so that it does not become trapped or damaged. Be 

particularly aware of trapping damage when using side rails. Always make sure that the 

mattress is the correct size for the bed. 

 

3.

 

Regularly check product functionality by performing a hand check.

 

 

4.

 

When the product is used for individuals needing special supervision, such as children, 

continuous monitoring is required.

 

 

5.

 

The mattress is protected by a hygiene cover; avoid using multiple hygiene covers as this can 

affect the vapor permeability of the mattress.

 

 

6.

 

The hygiene cover does not allow liquid or air to penetrate but is vapour permeable. Make 

sure that the user is positioned correctly to avoid the risk of suffocation.

 

 

7.

 

Be careful with sharp objects to prevent damage to the hygiene cover.

 

 

8.

 

Do not open the control unit housing – risk for electric shock. Servicing and maintenance must 

be performed by Care of Sweden or one of its authorized service technicians.

 

 

9.

 

Route the power cable to the control unit carefully to avoid tripping. Also make sure that the 

user is lying correctly on the mattress according to the instructions and use a cable holder if 

possible.

 

 

10.

 

To avoid the risk of strangulation, make sure that the cable and tubes are routed to prevent 

someone getting caught up in them.

 

 

11.

 

Do not use the product in bathrooms or other area where there is a risk of the control unit 

coming into contact with water or other liquids. Except for specified cleaning, never handle a 

product that has come into contact with water/liquid. Pull the plug out of the electrical socket 

immediately and send the product to an authorized service technician for servicing

 

 

12.

 

Do not use close to or in contact with fire sources/hot surfaces, such as fire, burning cigarettes, 

hot lamps, heating fans or heating stoves/open fires as this could damage the product.

 

 

13.

 

Do not store or use the product in direct sunlight. The product may be damaged by the 

elevated temperature and UV light.

 

 
 

 

 

Summary of Contents for CuroCell A4





































Reviews: