background image

13

 

 

5. Reuse, cleaning and reconditioning 

 

The product is reusable. When reusing, it is important to follow the instructions below for 

cleaning and reconditioning. Before using the product again for a new user, it is 

recommended to clean the mattress in accordance with the instructions below. Consult 

your hygiene manager or Care of Sweden for help and instructions if you are unsure. 
Cleaning and reconditioning should otherwise be performed as required. 

 

5.1 Cleaning

 

 

PUMP 

Wipe off the pump with a damp cloth and mild cleaning solution for this purpose: 

such as alcohol with or without tenside surfactants, oxidizing solutions, chlorine 

max 1 % or hydrogen peroxide max 1,5 %. 

If using a different agent, choose one that does not affect the pump. 
 

MATTRESS COVER 

 

Covers can be wiped off with a mild cleaning solu- tion for this purpose such as: 

alcohol with or with- out tenside surfactants, Isopropanol 70 %, oxidizing solutions, 

chlorine max 1 % (max 10% for cover Stone) or hydrogen peroxide max 1,5 %. 

Excrement and blood stains must be removed as soon as possible using cold water. Carefully 

follow local instructions and the instructions for the detergent. 

 

 

 

 

Multi-layer covers should be divided before washing. The parts should be washed with 

similar colours. 

Chlorine and phenol-based cleaners could adversely affect the PU surface and 

should be avoided. If chlorine is used, we recommend a mixture of max 1 % (max 

10% for cover Stone).

 

 

 

INNER COVER  

 

 

 

 

 

 

Clean the affected area with a mild cleaning solution for this purpose such as: alcohol with or 

without tenside surfactants, Isopropanol 70 %, oxidizing solutions, chlorine max 1 % or 

hydrogen peroxide max 1,5 %. 

 

 

 

 

 

 

 

 

Summary of Contents for CuroCell AUTO4

























Reviews: