background image

3

 

 

WARNINGS AND SAFETY

 

PRECAUTIONS  

Read all instructions before use or repair 

 

 

 

 

 

 

 

 

WARNING! To minimize the risk of fire, personal injury and equipment/property damage adhere to 

the following instructions:

 

 

1.

 

The product must only be installed and used for its intended purpose according to the 

instructions in this manual and/ or other documentation from Care of Sweden. The 

product must not be combined, assembled or repaired with parts (e.g. control unit and 

mattress), accessories or spare parts other than those described in this manual or other 

documentation from Care of Sweden. The product must not be modified in any way. 

2.

 

The product must be placed and used so that it does not become trapped or 

damaged. Note: Be particularly aware of trapping damage when using side rails. 

Always make sure that the mattress is the correct size for the bed. 

3.

 

Regularly check product functionality by performing a hand check (see section 4.4). 

4.

 

When the product is used for individuals needing special supervision, such as children, 

continuous monitoring is required. 

5.

 

The mattress is protected by a hygiene cover; avoid using multiple hygiene covers as this 

can affect the vapor permeability of the mattress. 

6.

 

The hygiene cover does not allow liquid or air to penetrate, but is vapour 

permeable. Make sure that the user is positioned correctly to avoid the risk of 

suffocation. 

7.

 

Be careful with sharp objects to prevent damage to the hygiene cover. 

8.

 

Do not open the control unit housing – risk for electric shock. Servicing and 

maintenance must be performed by Care of Sweden or one of its authorized 

service technicians. 

9.

 

Route the power cable to the control unit carefully to avoid tripping. Also make sure 

that the user is lying correctly on the mattress according to the instructions and use a 

cable holder if possible. 

10.

 

To avoid the risk of strangulation, make sure that the cable and tubes are routed to prevent 

someone getting caught up in them. 

 

 

Summary of Contents for CuroCell AUTO4

























Reviews: