ITEM Check List
Sensor Cable & Holder Transmitter
Magnet
Velcro
AAA Batteries
Sponge
Cable Stripe
Clamp Bracket Set
Chest Belt 2.4k optional
Universal Group Cycling Console Battery
Installations:
1. Remove the battery cover from the back of the
computer.
2. Insert 2 AAA batteries into the battery compartment
and reinstall the battery cover.
3. When Battery working voltage is low, the ‘Low battery’
indicator will show up on the Console display.
Speed Sensor Transmitter Battery Installation
1. Remove the battery cover from the transmitter.
2. Install 2 AAA batteries in the battery compartment and
reinstall the battery cover.
INSTALLATION OF THE UNIVERSAL GROUP
CYCLING MONITOR
This UNIVERSAL GROUP CYCLING MONITOR can be
installed onto most of Group Cycling and Spin Style bike
handlebars.
Console Installation:
1.Ensure the Console Clamp is securely mounted on the
back of the console. Insert the mounting screw
through the Console Clamp into the Console.
