Special attention: It’s not more tighter, more better for the driving belt. Too tight or loose of the belt
will shorten the life span of the driving belt.
Common failure and maintenance
1.
Malfunction of display
1)
After switch on the power, the digital transistor doesn’t display and the buzzer keeps ringing. Solution:
change the monitor.
2)
After switch on the power, the machine can be started and all displays are normal, but both the FAST
and SLOW key doesn’t work. Solution: change the monitor.
3)
After switch on the power, each digital transistor displays the same strokes, the buzzer has no sound
and all the keys don’t work. Solution: change the monitor.
4)
After switch on the power and do not to press start key, the treadmill starts at a lower speed, and the
FAST key and SLOW key don’t work. Solution: change the monitor.
5)
The START and STOP key work normally, the speed can become fast but can’t become slow, the keys
were damaged or the signal cable is not in good connection. Solution: change the monitor.
6)
The digital transistor can’t display or only display half-baked number, the digital transistor was damaged
but treadmill can work normally. Solution: change the monitor.
7)
Press start key, the treadmill works at an initial speed, but stop after 5 seconds. Solution: change the
monitor.
8)
After start treadmill, it only displays unchanged speed in the speed window; and FAST and SLOW key
can’t change the speed. Solution: change the monitor.
9)
After switch on the power, the digital transistor flashes regularly. Method: make sure the safety key on
the right position. If the digital transistor still flashes regularly, please change the monitor.
10) Without the safety key and switch on the power, the digital transistor doesn’t flash, press START key,
the treadmill works normally. Solution: change the monitor.
2. Malfunction of Controller
1)
After switch on the power and press START key, the treadmill works at a high speed and can’t stop
2)
After switch on the power, the display and the buzzer work; press START key, the time in the window
can be record 5 seconds and then the buzzer rings again, but the treadmill can’t work.
3)
The display of the monitor and the buzzer is normal, but the running belt doesn’t move after startup.
4)
After switch on the power, the monitor displays normally; the relay can’t close after setup and the belt
moves a little distance then stop soon.
5)
After switch on the power, the monitor displays normally, the relay can’t close and press START key, the
treadmill doesn’t work.
6)
After switch on the power, the fuse is broken down.
Solution: for the 6 malfunctions above please replace the controller.
3.
Malfunction of the motor
1)
After startup, there’s collision sound or biggest noises from the motor.
Reason: the motor was damaged.
Solution: maintain or replace the motor.
2)
After switch on the power, the leakage protector opens circuit and the motor is creep age.
Solution: replace the motor.
To order spare parts
To guarantee an efficient service, make sure you have the following items before you contact our After Sales
Service:
The name or
reference of the product.
The
manufacturing number
shown on the main chassis and on the packing box.
The
number of the missing or faulty part
shown on the exploded view of the product described in this
manual.
After Sales Service
Email: service-uk@carefitness.com
Summary of Contents for CLUB RUNNER TFT
Page 54: ......
