P. 3
PRODUCT CODE
WA01082
OPENING/FOLDING THE ROLLATOR
OPENING
Note: Refer to the FOLDING/ASSEMBLY WARNINGS in the SAFETY SUMMARY of this
instruction sheet.
Notes: For clearer display, the bag is not attached to the rollator.
1. Install the hand grip with brake & armrest component to the top of the side tube, and rotate
the black lever by 90 degrees and then lock it to the slot, as shown in Figure 1.
2. Open the rollator by pushing the side
frames outwards, as shown in Figure 2.
FIGURE 2
FIGURE 1
3. Lower the seat and push it down until both
seat rails are fully locked into the plastic
slots, as shown in Figure 3.
FIGURE 3
