P. 6
PRODUCT CODE
WA01082
ADJUSTING HANDRAIL/ HAND GRIP/ BRAKE CABLES
Notes: Refer to the INSTALLATION WARNINGS in the SAFETY SUMMARY of this instruction
sheet.
1. Release the knob and adjust the height handrails upward or downward to the desired
height. Ensure both handrails are at the same height and the knob is locked after height
adjustment, as shown in figure 8.
2. Open the quick-release lever, adjust the hand grip to the appropriate angle and fasten the
lever. Ensure the quick-release lever is locked after angle adjustment, as shown in Figure 9.
FIGURE 8
FIGURE 9
USING HAND BRAKES
1. Pull the top portion of the brake handles UP towards
the hand grips, as shown in Figure 10.
FIGURE 10
LOCKING HAND BRAKES
1. Push DOWN on the bottom
portion of the brake handle
until an audible “click” is heard,
as shown in Figure 11.
FIGURE 11