PAGE 3
Assembly Instructions
1. Fold out the seat fully by pushing down on the four corners of the seat. Ensure the
seat is folded out fully otherwise the armrest may not locate properly.
2. Flip the armrests around until they locate
into the armrest receivers (as shown in the
photo). The armrest release button will click to
indicate that the armrest has securely locked
in position.
3. Removing & Replacing Footrests
Swing the footrest to the side by pushing the
lever (1) Grasp the top bar of the footrest and
lift up (2), releasing the footrests from the pins.
Repeat on the other side. Holding the footrest
in one hand, from the side align the pins with
the holes in the footrest and attach (3). Swing
footrest back in place.
3.2 Adjusting the Footrest Length
Using the wrench provided, place it over the
bolt and turn to left to loosen or to the right to
tighten in place. Adjust the length by sliding
the footrest up or down so that the person’s
full thigh is supported by the seat.
4. Pull up the push handle until it locks into
position. You will hear a click when the handle
is securely locked. Repeat for the other handle.
1
2
3
