9
Instruction of using footrest
Place the U-shapped part to the Upper bolt in the front wheel part as shown in Figure 7. The
footrest pad could be adjusted in height in order to fit with a comfortable position for the
end user. To close the footrest: lift up the footrest, and remove it from the rollator, and it can
be attached to the lower bolt area as the U-Shaped part will engage there as shown in
following Figure 10 and 11.
(Figure 10)
(Figure 11)
Care and maintenance
1. Ensure that all attaching hardware is secure at ALL times.
2. Check screw securing seat to side slot for tightness. If not, TIGHTEN if
necessary.
3. Check the proper position of the quick release/assembly kits
4. Replace any broken, damaged or worn items immediately.
Care of wheeled accessories
1. Clean wheels with warm water and mild cleanser. Dry with clean rag.
2. Lubricate with 3-in-1 oil periodically or if wheels begin to squeak.
Instruction for Washing
Clean the rollator and its wheels with warm water and mild cleanse. DO NOT use any
chemicals with causticity. Otherwise, it may damage the surface of the rollator.
