5
Instructions
1. Open the box and take out the product out with care.
2. Place the product on a platform and assemble the rear wheel tubing into the frame, then
tighten it with the knob as shown in below picture.
3. Have the front wheel part insert into the housing until a click is heard as shown in picture
below
Warning for the knob at handle height adjustment
1. The handle height adjustment knob should be locked at all times whether being used as a
rollator or a transport chair to avoid injury.
2. Before tightening the knob, always make sure the hole of the handle bar matches with the
hole on the frame.
Otherwise, it may cause damage to the knob or the handle bar.
6. INSTRUCTIONS FOR USE
(Figure 2)
(Figure 3)
