6
4. Position the handle bar into the frame tubing, and make it to the desired height, then lock
with knob as shown in picture below.
5. The following picture shows the rollator is opened.
Note: before use, apply some load on the rolaltor handle bar to see if there is any play or
movement. If no movement and also the lever is fixed there tightly, then the rollator can be
used.
Note: before use, apply some load on the rollator handle bar to see if there is any movement.
If no movement and also the lever is fixed there tightly, then the rollator can be used.
6. Lift the seat upward, then the rollator could be folded as shown in picture below.
(Figure 4)
(Figure 5)
Lever in locked position