Carefree of Colorado VACATION'R, Owner'S Manual

V

ACATION

'

R

11 

C

ROSSING THE 

E

NTRY 

S

TEP

If the panel goes across the entry step:

1.  With the panel attached to the RV 

wall, carefully mark the location of 
the top, side edges of the step. 

2.  Remove the skirt from the RV and 

lay on a flat clean surface. 

3.  Measure the height of the step. 

4.  On the skirt, measure and cut a 1/2" 

slot from the marks made in step 1.  
the slot should be the height of the 
step + 1/2" 

5.  Draw and cut a straight line between 

the bottoms of the slots.  This creates a 
flap in the fabric. 

6.  Slide the skirting over the step and 

tuck the flap behind the stair tread.  
Attach the skirting to the skirt clips. 

7.  After hanging the skirting, fold any 

excess material under the vehicle 
and stake as desired. 

C

ROSSING THE 

D

OOR

If the skirting is mounted at the floor line or raised to avoid obstacles the skirting 
may cross over the door.  Simply mark the sides of the door and trim the material 
vertically on each side.  Fold the excess material behind the panel. 

Completed Skirt

we006

Step 1/2”

Outer Edge

of Step

we005

Top of Step

Outer Edge

of Step

Outer Edge

of Step

Outer Edge

of Step

1/2”

Top of Step

Step Height