4
Warning
All illustrations and operating instructions should
be read before the unit is connected to power
and operated. The installation and operating
instructions should be retained for future
reference. All operating and user instructions
should be followed. The housing should be
mounted to a wall or as recommended by the
manufacturer. The unit should be connected to a
power supply only of the type described in the
operating instructions or as marked on the unit.
Regular testing by entering any valid Personal
Code Numbers must be done to ensure proper
operation. Make sure that all necessary
requirements, such as the proper placing of
operating, warning and safety signs are followed
in accordance with all Local, State and Federal
regulations to ensure the safety and well-being
of all those within the area of operation of this
unit. Install this unit only on a gate or door
operator with an automatic force reverse action.
Please refer to your Gate or
Door Operating Manual for correct wiring of this keypad to your equipment
.
